Products
CRAZY LEOPARDS - 4 PATCH SET - LIBRE 3 OVERLAY
Are you looking for overlays that will keep your Libre 3 sensors secure without causing skin irritation? Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Libre 3 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 3 GripShield™ from our friends at Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch. There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look). Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$9.00
CRAZY LEOPARDS - 4 PATCH SET - DEXCOM G6 OVERLAY
Don't worry about losing your Dexcom G6 sensors with The Sugar Patch overlays! Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch overlays will keep your sensors secure and looking SWEET! The Sugar Patch Dexcom G6 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G6 GripShield™ from our friends at Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch. There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look). Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$9.00
CRAZY LEOPARDS - 4 PATCH SET - INFUSION SET OVERLAY
Are you looking for overlays that will keep your Infusion sets secure without causing skin irritation? Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Infusion Set overlay patches are precut so that the patch fits securely around your Infusion Site, and will allow you to disconnect and reconnect with ease. We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before inserting your infusion set, use an alcohol swab or non-oily soap and water to clean the skin where your set will be located. Be sure that the skin under and around the insertion site is dry, and avoid using lotions, oils or powders near the infusion set or patches. Insert your infusion set by following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$9.00
CRAZY LEOPARDS - 4 PATCH SET - LARGE SOLID OVERLAYS
The Sugar Patch LARGE Solid Overlays can be used over low profile sensors such as Medtronic Guardian & LIBRE 2 SENSORS. Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Solid overlay patches fit securely over your sensor, and onto your skin. We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$9.00
CRAZY LEOPARDS - 4 PATCH SET - LIBRE 2
Are you looking for overlays that will keep your Libre 2 sensors secure without causing skin irritation? Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Libre 2 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 2 GripShield™ from our friends at Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch. There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look). Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$9.00
CRAZY LEOPARDS - 4 PATCH SET - OMNIPOD OVERLAYS
Hey Podders! The Sugar Patch designs and makes overlays that will keep your pods secure and looking sweet without causing skin irritation. Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Omnipod overlay patches are precut so that the patch fits securely around your pod, and will also work perfectly with the Omnipod GripShield™ from our friends at Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch. There is no reason to pay extra for a sticker to put on your pod ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for the duration of your pod. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your pod, use an alcohol swab or non-oily soap and water to clean the skin where your pod will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the pod or patches. Apply your pod by following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the pod and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. The center piece that has been cut-out can be applied to the top of your pod to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look). Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and pod site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR PODS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$9.00
CRUSH TYPE 1 DIABETES MONSTER TRUCK - DEXCOM G6 OVERLAYS
Don't worry about losing your Dexcom G6 sensors with The Sugar Patch overlays! Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch overlays will keep your sensors secure and looking SWEET! The Sugar Patch Dexcom G6 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G6 GripShield™ from our friends at Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch. There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look). Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$2.75
CRUSH TYPE 1 DIABETES MONSTER TRUCK - DEXCOM G7 OR DEXCOM STELO OVERLAY
Are you looking for overlays that will keep your Dexcom G7 or Stelo sensors secure without causing skin irritation? Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Dexcom G7 and Stelo overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G7 GripShield™ from our friends at Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch. There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look). Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$2.50
CRUSH TYPE 1 DIABETES MONSTER TRUCK - INFUSION SET OVERLAY
Are you looking for overlays that will keep your Infusion sets secure without causing skin irritation? Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Infusion Set overlay patches are precut so that the patch fits securely around your Infusion Site, and will allow you to disconnect and reconnect with ease. We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before inserting your infusion set, use an alcohol swab or non-oily soap and water to clean the skin where your set will be located. Be sure that the skin under and around the insertion site is dry, and avoid using lotions, oils or powders near the infusion set or patches. Insert your infusion set by following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$2.50
CRUSH TYPE 1 DIABETES MONSTER TRUCK - LARGE SOLID OVERLAY
The Sugar Patch LARGE Solid Overlays can be used over low profile sensors such as Medtronic Guardian & LIBRE 2 SENSORS. Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Solid overlay patches fit securely over your sensor, and onto your skin. We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$2.75
CRUSH TYPE 1 DIABETES MONSTER TRUCK - LIBRE 2
Are you looking for overlays that will keep your Libre 2 sensors secure without causing skin irritation? Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Libre 2 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 2 GripShield™ from our friends at Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch. There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look). Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$2.75
CRUSH TYPE 1 DIABETES MONSTER TRUCK - LIBRE 3 OVERLAY
Are you looking for overlays that will keep your Libre 3 sensors secure without causing skin irritation? Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Libre 3 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 3 GripShield™ from our friends at Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch. There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look). Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$2.50
CRUSH TYPE 1 DIABETES MONSTER TRUCK - OMNIPOD OVERLAY
Hey Podders! The Sugar Patch designs and makes overlays that will keep your pods secure and looking sweet without causing skin irritation. Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Omnipod overlay patches are precut so that the patch fits securely around your pod, and will also work perfectly with the Omnipod GripShield™ from our friends at Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch. There is no reason to pay extra for a sticker to put on your pod ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for the duration of your pod. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your pod, use an alcohol swab or non-oily soap and water to clean the skin where your pod will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the pod or patches. Apply your pod by following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the pod and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. The center piece that has been cut-out can be applied to the top of your pod to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look). Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and pod site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR PODS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$2.75
CRUSH TYPE ONE DIABETES - MONSTER TRUCK - PATCH
Custom Medical Grade Hypoallergenic Overlays with Extended Wear Adhesive for CGMs, Pods, and Infusion Sites Sizes and Shapes Round Shaped Patches (Solid Patches/No Cut-Outs, Dexcom G6 & Libre 2) 3.5 inches x 3.5 inches Omnipod Shaped Patches 3 inches x 3.85 inches Smaller Round Shaped Patches (Dexcom G7, Libre 3 & infusion site) 2.75 inches x 2.75 inches Our patches do not contain or include any type of medications or prescription items. They are latex free, and are made solely for the purpose of keeping your pumps and sensors securely attached, while bringing a smile to the not-so-fun stuff that goes with having diabetes.
$2.75
DEXCOM G7 - BULK SETS (12. 24, 48, 60) WHITE OVERLAYS
White Hypoallergenic Overlays for Dexcom G7 sensors These overlays are 2.75 inches in diameter and will fit securely over the sensor and barrier patches. These overlays will allow for easy connect and disconnect of infusion set tubing, while keeping the cannula securely attached to the skin. Overlays for the Dexcom G7 sensors are available in 12, 24, 48, or 60 count packs.
$10.00 - $36.00
DEXCOM G7 / LIBRE 3 - UNDERLAY / BARRIER PATCHES
DEXCOM G7 / LIBRE 3 - UNDERLAY/BARRIER PATCHES **NEWLY INCREASED SIZE TO 2 INCHES DIAMETER** Many of our friends have experienced severe adhesive reactions from CGM sensors, so we have made some simple unprinted barrier tapes, with the same hypoallergenic tape used in our patches, that will keep the sensor tape from touching the skin and causing reactions, itching, and/or adhesive chemical burns. The DEXCOM G7 / LIBRE 3 Circular Shaped Adhesive Barrier patches go under the sensor, protecting you from the adhesives used in the diabetes technology that you use. The barriers are large enough to protect your skin under Dexcom G7 or Libre 3, yet small enough to be completely covered by our designer patches/overlays. We recommend that you also use one of our over patches to additionally secure your sensor. APPLICATION INSTRUCTIONS: The barrier patches are designed to be applied to the skin underneath the sensor to protect sensitive skin from the adhesive of the sensor. Clean and allow the skin to dry in the area where you will be applying the sensor. Remove the paper backing from the sensor and apply the cloth side of the barrier patch to the sensor's adhesive so that the insertion needle goes through the hole in the patch. The off-center hole in the patch will work perfectly with the Dexcom G7 and Libre 3 sensors. With the paper backing still on the patch, press firmly to assure that the sensor is secured to the barrier patch. Gently peel the backing away from the barrier patch, then apply the the sensor as you normally would to the skin (except that the barrier patch will be your adhesive). Use one of our overlay patches over the sensor and barrier patch to keep it secured to the skin. Be sure to pat dry the patches, or use a hair dryer on a low setting to dry the patches, after bathing or showering.
$10.00 - $25.00
DIABETES AWARENESS BUTTERFLY PATCH
Round Shaped 3.5 inches x 3.5 inches Omnipod Shaped 3 inches x 3.85 inches The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.75
DIABETES AWARENESS DAISY CIRCULAR PATCH
Round Shaped 3.5 inches x 3.5 inches Adhesive Patch The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.75
DIABETES AWARENESS GRADIENT RIBBON CIRCULAR PATCH
Round Shaped 3.5 inches x 3.5 inches Adhesive Patch The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.75
Diabetes Awareness Stamp - Grey
Round Shaped 3.5 inches x 3.5 inches Adhesive Patch The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.75
DIABETES WARRIOR PATCH
Custom Medical Grade Hypoallergenic Overlays with Extended Wear Adhesive for CGMs, Pods, and Infusion Sites Sizes and Shapes Round Shaped Patches (Solid Patches/No Cut-Outs, Dexcom G6 & Libre 2) 3.5 inches x 3.5 inches Omnipod Shaped Patches 3 inches x 3.85 inches Smaller Round Shaped Patches (Dexcom G7, Libre 3 & infusion site) 2.75 inches x 2.75 inches Our patches do not contain or include any type of medications or prescription items. They are latex free, and are made solely for the purpose of keeping your pumps and sensors securely attached, while bringing a smile to the not-so-fun stuff that goes with having diabetes.
$2.75
Diabetic Medical Alert
Round Shaped 3.5 inches x 3.5 inches Adhesive Patch The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.75
DIAMOND PLATE - OVAL
Oval Shaped 2.75 inches x 3.85 inches Adhesive Patch The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.25
DINO-MITE DINOSAUR - OVERLAY PATCH
Custom Medical Grade Hypoallergenic Overlays with Extended Wear Adhesive for CGMs, Pods, and Infusion Sites Sizes and Shapes DEXCOM G6 - Circular shaped - 3.5 inches x 3.5 inches SOLID PATCH/NO CUT-OUT - Circular shaped - 3.5 inches DEXCOM G7 - Circular shaped - 2.75 inches OMNIPOD - Pod shaped - 3 inches x 3.85 inches LIBRE 3 - Circular shaped - 2.75 inches LIBRE 2 - Circular shaped - 3.5 inches INFUSION SITE - Circular shaped - 2.75 inches Our patches do not contain or include any type of medications or prescription items. They are latex free, and are made solely for the purpose of keeping your pumps and sensors securely attached, while bringing a smile to the not-so-fun stuff that goes with having diabetes. The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.25 - $2.75
DINOS & VOLCANOS PATTERN PATCH
Custom Medical Grade Hypoallergenic Overlays with Extended Wear Adhesive for CGMs, Pods, and Infusion Sites Sizes and Shapes Large Oval Shaped Patches (Solid Patches/No Cut-Outs, Dexcom G6 & Libre 2) 2.75 inches x 3.85 inches Omnipod Shaped Patches 3 inches x 3.85 inches Smaller Oval Shaped Patches (Dexcom G7, Libre 3 & infusion site) 2.5 inches x 3.5 inches Our patches do not contain or include any type of medications or prescription items. They are latex free, and are made solely for the purpose of keeping your pumps and sensors securely attached, while bringing a smile to the not-so-fun stuff that goes with having diabetes. The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.50
DINOSAUR VALLEY
Round Shaped 3.5 inches x 3.5 inches Adhesive Patch The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.75
DON'T GO BACON MY HEART PATCH
Round Shaped 3.5 inches x 3.5 inches Omnipod Shaped 3 inches x 3.85 inches The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.75
Donuts Multi-Flavored
Oval Shaped 2.75 inches x 3.85 inches Adhesive Patch The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.25
DUCK DUCK GOOSE PATTERN PATCH
Custom Medical Grade Hypoallergenic Overlays with Extended Wear Adhesive for CGMs, Pods, and Infusion Sites Sizes and Shapes Large Oval Shaped Patches (Solid Patches/No Cut-Outs, Dexcom G6 & Libre 2) 2.75 inches x 3.85 inches Omnipod Shaped Patches 3 inches x 3.85 inches Smaller Oval Shaped Patches (Dexcom G7, Libre 3 & infusion site) 2.5 inches x 3.5 inches Our patches do not contain or include any type of medications or prescription items. They are latex free, and are made solely for the purpose of keeping your pumps and sensors securely attached, while bringing a smile to the not-so-fun stuff that goes with having diabetes. The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.50
EASTER BUNNIES & EGGS PATTERN - PATCH
Custom Medical Grade Hypoallergenic Overlays with Extended Wear Adhesive for CGMs, Pods, and Infusion Sites Sizes and Shapes Round Shaped Patches (Solid Patches/No Cut-Outs, Dexcom G6 & Libre 2) 3.5 inches x 3.5 inches Omnipod Shaped Patches 3 inches x 3.85 inches Smaller Round Shaped Patches (Dexcom G7, Libre 3 & infusion site) 2.75 inches x 2.75 inches Our patches do not contain or include any type of medications or prescription items. They are latex free, and are made solely for the purpose of keeping your pumps and sensors securely attached, while bringing a smile to the not-so-fun stuff that goes with having diabetes.
$2.75
EASTER CROSS DOODLE CIRCULAR PATCH
Round Shaped 3.5 inches x 3.5 inches Adhesive Patch The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.75
EASTER EGGS PATTERN - PATCH
Custom Medical Grade Hypoallergenic Overlays with Extended Wear Adhesive for CGMs, Pods, and Infusion Sites Sizes and Shapes Round Shaped Patches (Solid Patches/No Cut-Outs, Dexcom G6 & Libre 2) 3.5 inches x 3.5 inches Omnipod Shaped Patches 3 inches x 3.85 inches Smaller Round Shaped Patches (Dexcom G7, Libre 3 & infusion site) 2.75 inches x 2.75 inches Our patches do not contain or include any type of medications or prescription items. They are latex free, and are made solely for the purpose of keeping your pumps and sensors securely attached, while bringing a smile to the not-so-fun stuff that goes with having diabetes.
$2.75
EMERGENCY MEDICAL TECHNICIAN EMT
Round Shaped 3.5 inches x 3.5 inches Adhesive Patch The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.75
EMOJIS - 6 PATCH SET - LARGE SOLID OVERLAYS
The Sugar Patch LARGE Solid Overlays can be used over low profile sensors such as Medtronic Guardian & LIBRE 2 SENSORS. Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Solid overlay patches fit securely over your sensor, and onto your skin. We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$15.00
EMOJIS - 6 PATCH SET - DEXCOM G6 OVERLAYS
Don't worry about losing your Dexcom G6 sensors with The Sugar Patch overlays! Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch overlays will keep your sensors secure and looking SWEET! The Sugar Patch Dexcom G6 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G6 GripShield™ from our friends at Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch. There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look). Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$15.00
EMOJIS - 6 PATCH SET - DEXCOM G7 OR DEXCOM STELO OVERLAY
Are you looking for overlays that will keep your Dexcom G7 or Stelo sensors secure without causing skin irritation? Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Dexcom G7 and Stelo overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G7 GripShield™ from our friends at Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch. There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look). Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$14.00
EMOJIS - 6 PATCH SET - INFUSION SET OVERLAY
Are you looking for overlays that will keep your Infusion sets secure without causing skin irritation? Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Infusion Set overlay patches are precut so that the patch fits securely around your Infusion Site, and will allow you to disconnect and reconnect with ease. We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before inserting your infusion set, use an alcohol swab or non-oily soap and water to clean the skin where your set will be located. Be sure that the skin under and around the insertion site is dry, and avoid using lotions, oils or powders near the infusion set or patches. Insert your infusion set by following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$14.00
EMOJIS - 6 PATCH SET - LIBRE 2
Are you looking for overlays that will keep your Libre 2 sensors secure without causing skin irritation? Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Libre 2 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 2 GripShield™ from our friends at Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch. There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look). Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$15.00
EMOJIS - 6 PATCH SET - OMNIPOD OVERLAYS
Hey Podders! The Sugar Patch designs and makes overlays that will keep your pods secure and looking sweet without causing skin irritation. Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Omnipod overlay patches are precut so that the patch fits securely around your pod, and will also work perfectly with the Omnipod GripShield™ from our friends at Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch. There is no reason to pay extra for a sticker to put on your pod ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for the duration of your pod. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your pod, use an alcohol swab or non-oily soap and water to clean the skin where your pod will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the pod or patches. Apply your pod by following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the pod and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. The center piece that has been cut-out can be applied to the top of your pod to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look). Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and pod site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR PODS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$15.00
EMOJIS- 6 PATCH SET - LIBRE 3 OVERLAY
Are you looking for overlays that will keep your Libre 3 sensors secure without causing skin irritation? Our variety of overlays are designed with your fashion and lifestyle in mind. The Sugar Patch Libre 3 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 3 GripShield™ from our friends at Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch. There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches. See our CLINICAL DATA SUMMARY for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels. The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located. Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer. To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing. Center the cut-out (hole) on the patch over the sensor and onto the skin. Adjustments to the patch can be made before the overlay has been pressed down to the skin. The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look). Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it. After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat. Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.
$14.00
EVERYBODY'S GONE SURFIN PATTERN - OVERLAY PATCH
Custom Medical Grade Hypoallergenic Overlays with Extended Wear Adhesive for CGMs, Pods, and Infusion Sites Sizes and Shapes DEXCOM G6 - Oval shaped - 2.75 inches x 3.85 inches SOLID PATCH/NO CUT-OUT - Circular shaped - 3.5 inches DEXCOM G7 - Circular shaped - 2.75 inches OMNIPOD - Pod shaped - 3 inches x 3.85 inches LIBRE 3 - Circular shaped - 2.75 inches LIBRE 2 - Circular shaped - 3.5 inches INFUSION SITE - Circular shaped - 2.75 inches Our patches do not contain or include any type of medications or prescription items. They are latex free, and are made solely for the purpose of keeping your pumps and sensors securely attached, while bringing a smile to the not-so-fun stuff that goes with having diabetes. The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.25 - $2.75
EXCAVATOR DOODLES
Round Shaped 3.5 inches x 3.5 inches Adhesive Patch The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.75
F.R.O.G. Fully Rely On God
In memory of my long time friend, Elizabeth Collier, whom I admired for her faith in God, and her accomplishments through the struggles she faced in life. Round Shaped 3.5 inches x 3.5 inches Adhesive Patch The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.50
FAITH HOPE & T1D (TYPE ONE DIABETES) CIRCULAR PATCH
Round Shaped 3.5 inches x 3.5 inches Adhesive Patch The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.75
FAITH HOPE & T1D (TYPE ONE DIABETES) OVAL PATCH
Oval Shaped 2.75 inches x 3.85 inches Adhesive Patch The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.25
FAITH HOPE & T2D (TYPE TWO DIABETES) CIRCULAR PATCH
Round Shaped 3.5 inches x 3.5 inches Adhesive Patch The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.75
FAITH HOPE & T2D (TYPE TWO DIABETES) OVAL PATCH
Oval Shaped 2.75 inches x 3.85 inches Adhesive Patch The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.25
FALL CAMPING DOODLES - CIRCULAR
Round Shaped 3.5 inches x 3.5 inches Adhesive Patch The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.
$2.75
You have seen 288 out of 1036 products