Welcome to THE SUGAR PATCH!

UNDERLAY BARRIER PATCHES

7 products


  • SENSOR/INFUSION BARRIERS/UNDERLAY PATCHES FOR DEXCOM G6, MEDTRONIC AND LIBRE 2 SENSORS (NO HOLE)

    SENSOR/INFUSION BARRIERS/UNDERLAY PATCHES FOR DEXCOM G6, MEDTRONIC AND LIBRE 2 SENSORS (NO HOLE)

    UNDERLAY/BARRIER PATCHES 2.35 INCHES X 3.3 INCHES  Great for Dexcom G6, Medtronic Guardian and Libre 2 sensors!  If you are using the Dexcom G7 or Libre 3 sensors, please, use the Dexcom G7/Libre 3 underlay/barrier patches with hole for sensor needle  or Small Generic underlay/barrier patches without hole for sensor needle Many of our friends have experienced severe adhesive reactions from CGM sensors, so we have made some simple unprinted barrier tapes, with the same hypoallergenic tape used in our patches, that will keep the sensor or pump tape from touching the skin and causing reactions, itching, and/or adhesive chemical burns. These Oval Shaped Adhesive Barrier patches go under the sensor, protecting you from the adhesives used in the diabetes technology that you use.  The barriers are large enough to protect your skin under Dexcom G6, Medtronic & Libre 2 sensors, yet small enough to be completely covered by our designer patches/overlays.  We recommend that you also use one of our over patches to additionally secure your sensor, pod or infusion set. APPLICATION INSTRUCTIONS: Barrier/Underlay Patches:  These patches are designed to be applied directly to the skin underneath the sensor, pod, or infusion set to protect sensitive skin from irritation or allergic reactions from their adhesives.  Peel patch away from the backing and apply to clean dry skin where you will be applying the sensor, pod or infusion set.  Apply the sensor, pod, or infusion set over the patch and insert it through the patch.  Apply one of our Overlay Patches over the sensor, pod, or infusion set, to provide extra security.

    $4.25 - $15.50

  • DEXCOM G7 / LIBRE 3 -  UNDERLAY / BARRIER PATCHES

    DEXCOM G7 / LIBRE 3 - UNDERLAY / BARRIER PATCHES

     DEXCOM G7 / LIBRE 3 - UNDERLAY/BARRIER PATCHES **NEWLY INCREASED SIZE TO 2 INCHES DIAMETER** Many of our friends have experienced severe adhesive reactions from CGM sensors, so we have made some simple unprinted barrier tapes, with the same hypoallergenic tape used in our patches, that will keep the sensor tape from touching the skin and causing reactions, itching, and/or adhesive chemical burns. The DEXCOM G7 / LIBRE 3 Circular Shaped Adhesive Barrier patches go under the sensor, protecting you from the adhesives used in the diabetes technology that you use.  The barriers are large enough to protect your skin under Dexcom G7 or Libre 3, yet small enough to be completely covered by our designer patches/overlays.  We recommend that you also use one of our over patches to additionally secure your sensor. APPLICATION INSTRUCTIONS: Barrier/Underlay Patches:  These patches are designed to be applied directly to the skin underneath the sensor, pod, or infusion set to protect sensitive skin from irritation or allergic reactions from their adhesives.  Peel patch away from the backing and apply to clean dry skin where you will be applying the sensor, pod or infusion set.  Apply the sensor, pod, or infusion set over the patch and insert it through the patch.  Apply one of our Overlay Patches over the sensor, pod, or infusion set, to provide extra security.  

    $10.00 - $25.00

  • OMNIPOD BARRIERS / UNDERLAY PATCHES

    OMNIPOD BARRIERS / UNDERLAY PATCHES

    OMNIPOD SHAPED UNDERLAY / BARRIER PATCHES 2.4 INCHES X 3 INCHES Many of our friends have experienced severe adhesive reactions from the Omnipod adhesives, so we have made some simple unprinted barrier tapes, with the same hypoallergenic tape used in our patches, that will keep the pod adhesive from touching the skin and causing reactions, itching, and adhesive chemical burns. We recommend that you also use one of our overlay patches to additionally secure your sensor, pod or infusion set. APPLICATION INSTRUCTIONS:   Clean the skin where you will be applying your pod with alcohol or soap and water, and allow the skin to completely dry.  Remove the Barrier Patch from the paper backing and apply it to the skin.  Follow the steps for filling the pod with insulin, and activating the pod.  Remove the backing from the pod adhesive. Center the pod over the Barrier Patch with the cannula hole aligned with the small hole in the patch.  Apply the pod to the Barrier Patch, smoothing down the pod adhesive, and then pressing firmly to assure adhesion to the patch.  Then complete the steps for inserting the cannula and activating the pod.  

    $10.00 - $34.00

  • SMALL GENERIC UNDERLAY / BARRIER PATCHES - SOLID PATCH WITH NO HOLES CUT (FOR DEXCOM G7, STELO, LIBRE 3, LIBRE 2, AND INFUSION SETS)

    SMALL GENERIC UNDERLAY / BARRIER PATCHES - SOLID PATCH WITH NO HOLES CUT (FOR DEXCOM G7, STELO, LIBRE 3, LIBRE 2, AND INFUSION SETS)

    GENERIC UNDERLAY / BARRIER PATCHES - SOLID PATCH WITH NO HOLES CUT - 2 INCHES DIAMETER  ***THIS SIZE WILL WORK WITH INFUSION SETS, DEXCOM G7, STELO, LIBRE 2 OR LIBRE 3 ONLY** Many of our friends have experienced severe adhesive reactions from their INFUSION SETS & SENSORS, so we have made some simple unprinted barrier tapes, with the same hypoallergenic tape used in our patches, that will keep the sensor tape from touching the skin and causing reactions, itching, and/or adhesive chemical burns. The Generic Circular Shaped Adhesive Barrier patches go under the infusion set or sensor, protecting you from the adhesives used in the diabetes technology that you use.  The barriers are large enough to protect your skin under your infusion set and Dexcom G7 or Libre 3 sensors, yet small enough to be completely covered by our designer patches/overlays.  We recommend that you also use one of our over patches to additionally secure your sensor. APPLICATION INSTRUCTIONS: The barrier patches are designed to be applied to the skin underneath the sensor to protect sensitive skin from the adhesive of the sensor. Clean and allow the skin to dry in the area where you will be applying the infusion set.  Gently peel the barrier patch away from the paper backing and apply it to the clean skin where you want your sensor located.  Then apply the sensor or infusion set as you normally would through the barrier patch.  Use one of our overlay patches over your sensor or infusion set and barrier patch to keep it secured to the skin.  Be sure to pat dry the patches, or use a hair dryer on a low setting to dry the patches, after bathing or showering.    

    $10.00 - $25.00

  • LIBRE 2 OR INFUSION SET -  UNDERLAY / BARRIER PATCHES

    LIBRE 2 OR INFUSION SET - UNDERLAY / BARRIER PATCHES

    LIBRE 2 OR INFUSION SET - UNDERLAY/BARRIER PATCHES - **NEWLY INCREASED SIZE TO 2 INCHES DIAMETER** Many of our friends have experienced severe adhesive reactions from their LIBRE 2 OR INFUSION SETS, so we have made some simple unprinted barrier tapes, with the same hypoallergenic tape used in our patches, that will keep the sensor tape from touching the skin and causing reactions, itching, and/or adhesive chemical burns. The LIBRE 2 / INFUSION SET Circular Shaped Adhesive Barrier patches go under the sensor / infusion set, protecting you from the adhesives used in the diabetes technology that you use.  The barriers are large enough to protect your skin under your sensor / infusion set, yet small enough to be completely covered by our designer patches/overlays.  We recommend that you also use one of our over patches to additionally secure your sensor. APPLICATION INSTRUCTIONS: Barrier/Underlay Patches:  These patches are designed to be applied directly to the skin underneath the sensor, pod, or infusion set to protect sensitive skin from irritation or allergic reactions from their adhesives.  Peel patch away from the backing and apply to clean dry skin where you will be applying the sensor, pod or infusion set.  Apply the sensor, pod, or infusion set over the patch and insert it through the patch.  Apply one of our Overlay Patches over the sensor, pod, or infusion set, to provide extra security.

    $10.00 - $25.00

  • OMNIPOD BARRIERS / UNDERLAY PATCHES - NO CANNULA HOLE

    OMNIPOD BARRIERS / UNDERLAY PATCHES - NO CANNULA HOLE

    OMNIPOD SHAPED UNDERLAY / BARRIER PATCHES 2.4 INCHES X 3 INCHES Many of our friends have experienced severe adhesive reactions from the Omnipod adhesives, so we have made some simple unprinted barrier tapes, with the same hypoallergenic tape used in our patches, that will keep the pod adhesive from touching the skin and causing reactions, itching, and adhesive chemical burns. We recommend that you also use one of our overlay patches to additionally secure your sensor, pod or infusion set. APPLICATION INSTRUCTIONS:   Clean the skin where you will be applying your pod with alcohol or soap and water, and allow the skin to completely dry.  Remove the Barrier Patch from the paper backing and apply it to the skin.  Follow the steps for filling the pod with insulin, and activating the pod.  Remove the backing from the pod adhesive. Center the pod over the Barrier Patch with the cannula hole aligned with the small hole in the patch.  Apply the pod to the Barrier Patch, smoothing down the pod adhesive, and then pressing firmly to assure adhesion to the patch.  Then complete the steps for inserting the cannula and activating the pod.  

    $10.00 - $34.00

  • GENERIC UNDERLAY / BARRIER PATCHES - SOLID PATCH WITH NO HOLES CUT (PERFECT FOR USE UNDER MEDTRONIC GUARDIAN SENSORS)

    GENERIC UNDERLAY / BARRIER PATCHES - SOLID PATCH WITH NO HOLES CUT (PERFECT FOR USE UNDER MEDTRONIC GUARDIAN SENSORS)

    GENERIC UNDERLAY / BARRIER PATCHES - SOLID PATCH WITH NO HOLES CUT -2.25 INCHES DIAMETER  ***THIS SIZE IS PERFECT FOR MEDTRONIC GUARDIAN SENSORS AND WILL ALSO WORK WITH INFUSION SETS, DEXCOM G7, STELO, LIBRE 2 OR LIBRE 3 ONLY** Many of our friends have experienced severe adhesive reactions from their SENSORS & INFUSION SETS, so we have made some simple unprinted barrier tapes, with the same hypoallergenic tape used in our patches, that will keep the sensor tape from touching the skin and causing reactions, itching, and/or adhesive chemical burns. The Generic Circular Shaped Adhesive Barrier patches go under the infusion set or sensor, protecting you from the adhesives used in the diabetes technology that you use.  The barriers are large enough to protect your skin under your MEDTRONIC GUARDIAN SENSORS, infusion sets,  Dexcom G7 or Libre 3 sensors,  yet small enough to be completely covered by our designer patches/overlays.  We recommend that you also use one of our over patches to additionally secure your sensor. APPLICATION INSTRUCTIONS: The barrier patches are designed to be applied to the skin underneath the sensor to protect sensitive skin from the adhesive of the sensor. Clean and allow the skin to dry in the area where you will be applying the infusion set.  Gently peel the barrier patch away from the paper backing and apply it to the clean skin where you want your sensor located.  Then apply the sensor or infusion set as you normally would through the barrier patch.  Use one of our overlay patches over your sensor or infusion set and barrier patch to keep it secured to the skin.  Be sure to pat dry the patches, or use a hair dryer on a low setting to dry the patches, after bathing or showering.    

    $7.50 - $25.00

UNDERLAY BARRIER PATCHES

Login

Forgot your password?

Don't have an account yet?
Create account