Welcome to THE SUGAR PATCH! Please, be patient as we are still adding more to our new website.

WHAT'S NEW AT THE SUGAR PATCH?!

910 products


  • ABSTRACT ART DEXCOM G6 OVERLAYS  - 8 PATCH SET

    ABSTRACT ART DEXCOM G6 OVERLAYS - 8 PATCH SET

    Don't worry about losing your Dexcom G6 sensors with The Sugar Patch overlays!  Our variety of overlays are designed with your fashion and lifestyle in mind.  The Sugar Patch overlays will keep your sensors secure and looking SWEET! The Sugar Patch Dexcom G6 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G6 GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $17.50

  • ABSTRACT ART DEXCOM G7 OR DEXCOM STELO OVERLAYS  - 8 PATCH SET

    ABSTRACT ART DEXCOM G7 OR DEXCOM STELO OVERLAYS - 8 PATCH SET

    Are you looking for overlays that will keep your Dexcom G7 or Stelo sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Dexcom G7 and Stelo overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G7 GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $17.00

  • ABSTRACT ART INFUSION SET OVERLAYS  - 8 PATCH SET

    ABSTRACT ART INFUSION SET OVERLAYS - 8 PATCH SET

    Are you looking for overlays that will keep your Infusion sets secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Infusion Set overlay patches are precut so that the patch fits securely around your Infusion Site, and will allow you to disconnect and reconnect with ease. We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before inserting your infusion set, use an alcohol swab or non-oily soap and water to clean the skin where your set will be located.  Be sure that the skin under and around the insertion site is dry, and avoid using lotions, oils or powders near the infusion set or patches. Insert your infusion set by following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $17.00

  • ABSTRACT ART LIBRE 2 OVERLAYS  - 8 PATCH SET

    ABSTRACT ART LIBRE 2 OVERLAYS - 8 PATCH SET

    Are you looking for overlays that will keep your Libre 2 sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Libre 2 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 2 GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $18.00

  • ABSTRACT ART LIBRE 3 OVERLAYS  - 8 PATCH SET

    ABSTRACT ART LIBRE 3 OVERLAYS - 8 PATCH SET

    Are you looking for overlays that will keep your Libre 3 sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Libre 3 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 3 GripShield™ from our friends at  Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $17.00

  • ABSTRACT ART OMNIPOD OVERLAYS  - 8 PATCH SET

    ABSTRACT ART OMNIPOD OVERLAYS - 8 PATCH SET

    Hey Podders!  The Sugar Patch designs and makes overlays that will keep your pods secure and looking sweet without causing skin irritation.  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Omnipod overlay patches are precut so that the patch fits securely around your pod, and will also work perfectly with the Omnipod GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your pod ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for the duration of your pod.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your pod, use an alcohol swab or non-oily soap and water to clean the skin where your pod will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the pod or patches. Apply your pod by following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the pod and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your pod to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and pod site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $18.00

  • ABSTRACT ART SOLID OVERLAYS - 8 PATCH SET

    ABSTRACT ART SOLID OVERLAYS - 8 PATCH SET

    The Sugar Patch Solid Overlays can be used over low profile sensors such as Medtronic Guardian, Libre 2 & 3, and Dexcom G7 & Stelo. Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Solid overlay patches fit securely over your sensor, and onto your skin.  We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $18.00

  • ABSTRACT FLORAL - SOLID OVERLAYS - 6 PATCH SET

    ABSTRACT FLORAL - SOLID OVERLAYS - 6 PATCH SET

    The Sugar Patch Solid Overlays can be used over low profile sensors such as Medtronic Guardian, Libre 2 & 3, and Dexcom G7 & Stelo. Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Solid overlay patches fit securely over your sensor, and onto your skin.  We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $15.00

  • ABSTRACT FLORALS  LIBRE 3 OVERLAYS  - 6 PATCH SET

    ABSTRACT FLORALS LIBRE 3 OVERLAYS - 6 PATCH SET

    Are you looking for overlays that will keep your Libre 3 sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Libre 3 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 3 GripShield™ from our friends at  Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $14.00

  • ABSTRACT FLORALS -  DEXCOM G7 OR DEXCOM STELO OVERLAYS  - 6 PATCH SET

    ABSTRACT FLORALS - DEXCOM G7 OR DEXCOM STELO OVERLAYS - 6 PATCH SET

    Are you looking for overlays that will keep your Dexcom G7 or Stelo sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Dexcom G7 and Stelo overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G7 GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $14.00

  • ABSTRACT FLORALS -  INFUSION SET OVERLAYS  - 6 PATCH SET

    ABSTRACT FLORALS - INFUSION SET OVERLAYS - 6 PATCH SET

    Are you looking for overlays that will keep your Infusion sets secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Infusion Set overlay patches are precut so that the patch fits securely around your Infusion Site, and will allow you to disconnect and reconnect with ease. We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before inserting your infusion set, use an alcohol swab or non-oily soap and water to clean the skin where your set will be located.  Be sure that the skin under and around the insertion site is dry, and avoid using lotions, oils or powders near the infusion set or patches. Insert your infusion set by following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $14.00

  • ABSTRACT FLORALS - DEXCOM G6 OVERLAYS  - 6 PATCH SET

    ABSTRACT FLORALS - DEXCOM G6 OVERLAYS - 6 PATCH SET

    Don't worry about losing your Dexcom G6 sensors with The Sugar Patch overlays!  Our variety of overlays are designed with your fashion and lifestyle in mind.  The Sugar Patch overlays will keep your sensors secure and looking SWEET! The Sugar Patch Dexcom G6 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G6 GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $14.50

  • ABSTRACT FLORALS - OMNIPOD OVERLAYS  - 6 PATCH SET

    ABSTRACT FLORALS - OMNIPOD OVERLAYS - 6 PATCH SET

    Hey Podders!  The Sugar Patch designs and makes overlays that will keep your pods secure and looking sweet without causing skin irritation.  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Omnipod overlay patches are precut so that the patch fits securely around your pod, and will also work perfectly with the Omnipod GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your pod ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for the duration of your pod.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your pod, use an alcohol swab or non-oily soap and water to clean the skin where your pod will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the pod or patches. Apply your pod by following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the pod and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your pod to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and pod site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $15.00

  • ABSTRACT FLORALS LIBRE 2 OVERLAYS  - 6 PATCH SET

    ABSTRACT FLORALS LIBRE 2 OVERLAYS - 6 PATCH SET

    Are you looking for overlays that will keep your Libre 2 sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Libre 2 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 2 GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $15.00

  • ABSTRACT FLORALS OMNIPOD OVERLAYS  - 6 PATCH SET

    ABSTRACT FLORALS OMNIPOD OVERLAYS - 6 PATCH SET

    Hey Podders!  The Sugar Patch designs and makes overlays that will keep your pods secure and looking sweet without causing skin irritation.  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Omnipod overlay patches are precut so that the patch fits securely around your pod, and will also work perfectly with the Omnipod GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your pod ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for the duration of your pod.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your pod, use an alcohol swab or non-oily soap and water to clean the skin where your pod will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the pod or patches. Apply your pod by following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the pod and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your pod to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and pod site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $15.00

  • ALL TOGETHER NOW - FISH  - DEXCOM G7 OR DEXCOM STELO OVERLAY

    ALL TOGETHER NOW - FISH - DEXCOM G7 OR DEXCOM STELO OVERLAY

    Are you looking for overlays that will keep your Dexcom G7 or Stelo sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Dexcom G7 and Stelo overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G7 GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.50

  • ALL TOGETHER NOW - FISH -  DEXCOM G6 OVERLAY

    ALL TOGETHER NOW - FISH - DEXCOM G6 OVERLAY

    Don't worry about losing your Dexcom G6 sensors with The Sugar Patch overlays!  Our variety of overlays are designed with your fashion and lifestyle in mind.  The Sugar Patch overlays will keep your sensors secure and looking SWEET! The Sugar Patch Dexcom G6 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G6 GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

  • ALL TOGETHER NOW - FISH -  INFUSION SET OVERLAY

    ALL TOGETHER NOW - FISH - INFUSION SET OVERLAY

    Are you looking for overlays that will keep your Infusion sets secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Infusion Set overlay patches are precut so that the patch fits securely around your Infusion Site, and will allow you to disconnect and reconnect with ease. We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before inserting your infusion set, use an alcohol swab or non-oily soap and water to clean the skin where your set will be located.  Be sure that the skin under and around the insertion site is dry, and avoid using lotions, oils or powders near the infusion set or patches. Insert your infusion set by following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.50

  • ALL TOGETHER NOW - FISH -  LIBRE 2 OVERLAY

    ALL TOGETHER NOW - FISH - LIBRE 2 OVERLAY

    Are you looking for overlays that will keep your Libre 2 sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Libre 2 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 2 GripShield™ from our friends at  Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.75

  • ALL TOGETHER NOW - FISH -  OMNIPOD OVERLAY

    ALL TOGETHER NOW - FISH - OMNIPOD OVERLAY

    Hey Podders!  The Sugar Patch designs and makes overlays that will keep your pods secure and looking sweet without causing skin irritation.  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Omnipod overlay patches are precut so that the patch fits securely around your pod, and will also work perfectly with the Omnipod GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your pod ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for the duration of your pod.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your pod, use an alcohol swab or non-oily soap and water to clean the skin where your pod will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the pod or patches. Apply your pod by following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the pod and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your pod to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and pod site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR PODS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.75

  • ALL TOGETHER NOW - FISH - LIBRE 3 OVERLAY

    ALL TOGETHER NOW - FISH - LIBRE 3 OVERLAY

    Are you looking for overlays that will keep your Libre 3 sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Libre 3 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 3 GripShield™ from our friends at  Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.50

  • ALL TOGETHER NOW - FISH - SOLID OVERLAY

    ALL TOGETHER NOW - FISH - SOLID OVERLAY

    The Sugar Patch Solid Overlays can be used over low profile sensors such as Medtronic Guardian, Libre 2 & 3, and Dexcom G7 & Stelo. Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Solid overlay patches fit securely over your sensor, and onto your skin.  We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.75

  • ANCHORS AWAY  - DEXCOM G7 OR DEXCOM STELO OVERLAY

    ANCHORS AWAY - DEXCOM G7 OR DEXCOM STELO OVERLAY

    Are you looking for overlays that will keep your Dexcom G7 or Stelo sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Dexcom G7 and Stelo overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G7 GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.50

  • ANCHORS AWAY -  INFUSION SET OVERLAY

    ANCHORS AWAY - INFUSION SET OVERLAY

    Are you looking for overlays that will keep your Infusion sets secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Infusion Set overlay patches are precut so that the patch fits securely around your Infusion Site, and will allow you to disconnect and reconnect with ease. We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before inserting your infusion set, use an alcohol swab or non-oily soap and water to clean the skin where your set will be located.  Be sure that the skin under and around the insertion site is dry, and avoid using lotions, oils or powders near the infusion set or patches. Insert your infusion set by following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.50

  • ANCHORS AWAY -  LIBRE 2 OVERLAY

    ANCHORS AWAY - LIBRE 2 OVERLAY

    Are you looking for overlays that will keep your Libre 2 sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Libre 2 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 2 GripShield™ from our friends at  Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.75

  • ANCHORS AWAY -  OMNIPOD OVERLAY

    ANCHORS AWAY - OMNIPOD OVERLAY

    Hey Podders!  The Sugar Patch designs and makes overlays that will keep your pods secure and looking sweet without causing skin irritation.  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Omnipod overlay patches are precut so that the patch fits securely around your pod, and will also work perfectly with the Omnipod GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your pod ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for the duration of your pod.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your pod, use an alcohol swab or non-oily soap and water to clean the skin where your pod will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the pod or patches. Apply your pod by following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the pod and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your pod to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and pod site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR PODS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.75

  • ANCHORS AWAY - DEXCOM G6 OVERLAY

    ANCHORS AWAY - DEXCOM G6 OVERLAY

    Don't worry about losing your Dexcom G6 sensors with The Sugar Patch overlays!  Our variety of overlays are designed with your fashion and lifestyle in mind.  The Sugar Patch overlays will keep your sensors secure and looking SWEET! The Sugar Patch Dexcom G6 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G6 GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.65

  • ANCHORS AWAY - LIBRE 3 OVERLAY

    ANCHORS AWAY - LIBRE 3 OVERLAY

    Are you looking for overlays that will keep your Libre 3 sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Libre 3 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 3 GripShield™ from our friends at  Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.50

  • ANCHORS AWAY - SOLID OVERLAY

    ANCHORS AWAY - SOLID OVERLAY

    The Sugar Patch Solid Overlays can be used over low profile sensors such as Medtronic Guardian, Libre 2 & 3, and Dexcom G7 & Stelo. Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Solid overlay patches fit securely over your sensor, and onto your skin.  We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.75

  • ANCHORS AWAY OVAL PATCH

    ANCHORS AWAY OVAL PATCH

    Oval Shaped  2.75 inches x 3.85 inches Adhesive Patch  The patch designs shown are digital images and the actual patch may have a slightly duller appearance due to the porous material used. Please, refer to your physician or device manufacturer for any questions that you may have regarding the use of tape or patches. **THE SUGAR PATCH LLC is not affiliated with Dexcom, Medtronic, Abbot (makers of Freestyle Libre), Insulet (makers of Omnipod), or any other medical device manufacturer.

  • ANEEDA AXOLOTL  - DEXCOM G7 OR DEXCOM STELO OVERLAY

    ANEEDA AXOLOTL - DEXCOM G7 OR DEXCOM STELO OVERLAY

    Are you looking for overlays that will keep your Dexcom G7 or Stelo sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Dexcom G7 and Stelo overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G7 GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.50

  • ANEEDA AXOLOTL -  DEXCOM G6 OVERLAY

    ANEEDA AXOLOTL - DEXCOM G6 OVERLAY

    Don't worry about losing your Dexcom G6 sensors with The Sugar Patch overlays!  Our variety of overlays are designed with your fashion and lifestyle in mind.  The Sugar Patch overlays will keep your sensors secure and looking SWEET! The Sugar Patch Dexcom G6 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G6 GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

  • ANEEDA AXOLOTL -  INFUSION SET OVERLAY

    ANEEDA AXOLOTL - INFUSION SET OVERLAY

    Are you looking for overlays that will keep your Infusion sets secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Infusion Set overlay patches are precut so that the patch fits securely around your Infusion Site, and will allow you to disconnect and reconnect with ease. We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before inserting your infusion set, use an alcohol swab or non-oily soap and water to clean the skin where your set will be located.  Be sure that the skin under and around the insertion site is dry, and avoid using lotions, oils or powders near the infusion set or patches. Insert your infusion set by following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.50

  • ANEEDA AXOLOTL -  LIBRE 2 OVERLAY

    ANEEDA AXOLOTL - LIBRE 2 OVERLAY

    Are you looking for overlays that will keep your Libre 2 sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Libre 2 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 2 GripShield™ from our friends at  Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.75

  • ANEEDA AXOLOTL -  OMNIPOD OVERLAY

    ANEEDA AXOLOTL - OMNIPOD OVERLAY

    Hey Podders!  The Sugar Patch designs and makes overlays that will keep your pods secure and looking sweet without causing skin irritation.  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Omnipod overlay patches are precut so that the patch fits securely around your pod, and will also work perfectly with the Omnipod GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your pod ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for the duration of your pod.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your pod, use an alcohol swab or non-oily soap and water to clean the skin where your pod will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the pod or patches. Apply your pod by following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the pod and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your pod to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and pod site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR PODS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.75

  • ANEEDA AXOLOTL - LIBRE 3 OVERLAY

    ANEEDA AXOLOTL - LIBRE 3 OVERLAY

    Are you looking for overlays that will keep your Libre 3 sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Libre 3 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 3 GripShield™ from our friends at  Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.50

  • ANEEDA AXOLOTL - SOLID OVERLAY

    ANEEDA AXOLOTL - SOLID OVERLAY

    The Sugar Patch Solid Overlays can be used over low profile sensors such as Medtronic Guardian, Libre 2 & 3, and Dexcom G7 & Stelo. Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Solid overlay patches fit securely over your sensor, and onto your skin.  We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.75

  • ANEEDA AXOLOTL PATCH

    ANEEDA AXOLOTL PATCH

    Custom Medical Grade Hypoallergenic Overlays with Extended Wear Adhesive for CGMs, Pods, and Infusion Sites Sizes and Shapes Round Shaped Patches (Solid Patches/No Cut-Outs, Dexcom G6 & Libre 2)  3.5 inches x 3.5 inches  Omnipod Shaped Patches 3 inches x 3.85 inches Smaller Round Shaped Patches (Dexcom G7, Libre 3 & infusion site) 2.75 inches x 2.75 inches Our patches do not contain or include any type of medications or prescription items.  They are latex free, and are made solely for the purpose of keeping your pumps and sensors securely attached, while bringing a smile to the not-so-fun stuff that goes with having diabetes.  

  • ANIMAL HIDE PATTERNS - 6 PATCH SET -  DEXCOM G6 OVERLAY

    ANIMAL HIDE PATTERNS - 6 PATCH SET - DEXCOM G6 OVERLAY

    Don't worry about losing your Dexcom G6 sensors with The Sugar Patch overlays!  Our variety of overlays are designed with your fashion and lifestyle in mind.  The Sugar Patch overlays will keep your sensors secure and looking SWEET! The Sugar Patch Dexcom G6 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G6 GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $14.50

  • ANIMAL HIDE PATTERNS - 6 PATCH SET - DEXCOM G7 OR DEXCOM STELO OVERLAY

    ANIMAL HIDE PATTERNS - 6 PATCH SET - DEXCOM G7 OR DEXCOM STELO OVERLAY

    Are you looking for overlays that will keep your Dexcom G7 or Stelo sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Dexcom G7 and Stelo overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G7 GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $14.00

  • ANIMAL HIDE PATTERNS - 6 PATCH SET - INFUSION SET OVERLAY

    ANIMAL HIDE PATTERNS - 6 PATCH SET - INFUSION SET OVERLAY

    Are you looking for overlays that will keep your Infusion sets secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Infusion Set overlay patches are precut so that the patch fits securely around your Infusion Site, and will allow you to disconnect and reconnect with ease. We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before inserting your infusion set, use an alcohol swab or non-oily soap and water to clean the skin where your set will be located.  Be sure that the skin under and around the insertion site is dry, and avoid using lotions, oils or powders near the infusion set or patches. Insert your infusion set by following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $14.00

  • ANIMAL HIDE PATTERNS - 6 PATCH SET - LIBRE 2

    ANIMAL HIDE PATTERNS - 6 PATCH SET - LIBRE 2

    Are you looking for overlays that will keep your Libre 2 sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Libre 2 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 2 GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $15.00

  • ANIMAL HIDE PATTERNS - 6 PATCH SET - LIBRE 3 OVERLAY

    ANIMAL HIDE PATTERNS - 6 PATCH SET - LIBRE 3 OVERLAY

    Are you looking for overlays that will keep your Libre 3 sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Libre 3 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 3 GripShield™ from our friends at  Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $14.00

  • ANIMAL HIDE PATTERNS - 6 PATCH SET - OMNIPOD OVERLAYS

    ANIMAL HIDE PATTERNS - 6 PATCH SET - OMNIPOD OVERLAYS

    Hey Podders!  The Sugar Patch designs and makes overlays that will keep your pods secure and looking sweet without causing skin irritation.  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Omnipod overlay patches are precut so that the patch fits securely around your pod, and will also work perfectly with the Omnipod GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your pod ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for the duration of your pod.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your pod, use an alcohol swab or non-oily soap and water to clean the skin where your pod will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the pod or patches. Apply your pod by following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the pod and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your pod to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and pod site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR PODS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $15.00

  • ANIMAL HIDE PATTERNS - 6 PATCH SET - SOLID OVERLAY

    ANIMAL HIDE PATTERNS - 6 PATCH SET - SOLID OVERLAY

    The Sugar Patch Solid Overlays can be used over low profile sensors such as Medtronic Guardian, Libre 2 & 3, and Dexcom G7 & Stelo. Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Solid overlay patches fit securely over your sensor, and onto your skin.  We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $15.00

  • AXOLOTL LOVE -  DEXCOM G6 OVERLAY

    AXOLOTL LOVE - DEXCOM G6 OVERLAY

    Don't worry about losing your Dexcom G6 sensors with The Sugar Patch overlays!  Our variety of overlays are designed with your fashion and lifestyle in mind.  The Sugar Patch overlays will keep your sensors secure and looking SWEET! The Sugar Patch Dexcom G6 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Dexcom G6 GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

  • AXOLOTL LOVE -  LIBRE 2 OVERLAY

    AXOLOTL LOVE - LIBRE 2 OVERLAY

    Are you looking for overlays that will keep your Libre 2 sensors secure without causing skin irritation?  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Libre 2 overlay patches are precut so that the patch fits securely around your sensor, and will also work perfectly with the Libre 2 GripShield™ from our friends at  Deck My Diabetes. The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your sensor ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for up to 15 days of wear, depending on your activity level, humidity and temperature levels.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your sensor, use an alcohol swab or non-oily soap and water to clean the skin where your sensor will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the sensor or patches. Apply your sensor following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the sensor and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your sensor to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and sensor site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR SENSORS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.75

  • AXOLOTL LOVE -  OMNIPOD OVERLAY

    AXOLOTL LOVE - OMNIPOD OVERLAY

    Hey Podders!  The Sugar Patch designs and makes overlays that will keep your pods secure and looking sweet without causing skin irritation.  Our variety of overlays are designed with your fashion and lifestyle in mind.   The Sugar Patch Omnipod overlay patches are precut so that the patch fits securely around your pod, and will also work perfectly with the Omnipod GripShield™ from our friends at  Deck My Diabetes.  The centerpiece that is cut-out of the overlay will be included with your patch, and can be applied to the top of the sensor to complete the design on your patch.  There is no reason to pay extra for a sticker to put on your pod ever again! We use specially formulated medical grade hypoallergenic tape in making all of our overlays and barrier patches.  See our  CLINICAL DATA SUMMARY  for more information on the results of the sensitivity tests performed on our tape. Our tape is designed to last for the duration of your pod.   The Sugar Patch overlays will last longer when the following application process is followed. Before applying your pod, use an alcohol swab or non-oily soap and water to clean the skin where your pod will be located.  Be sure that the skin under and around the application site is dry, and avoid using lotions, oils or powders near the pod or patches. Apply your pod by following the instructions provided by your doctor, or diabetes trainer.  To apply the overlay, use the pad of your finger to gently lifte the edge of the patch away from the backing.  Center the cut-out (hole) on the patch over the pod and onto the skin.  Adjustments to the patch can be made before the overlay has been pressed down to the skin.  The center piece that has been cut-out can be applied to the top of your pod to complete the patch design (If you are using a GripShield, you may want to do this before applying the overlay and GripShield for a cleaner look).  Using a blow dryer on low heat after applying the overlay will help to seal the adhesive to the skin. Avoid getting the patch wet for 4 hours after applying it.  After bathing or swimming, be sure to thouroughly dry the patch and pod site using a clean towel or blow dryer on low heat.  Should the edges of the patch ever begin to lift, using a blow dryer on low heat will reactivate the adhesive, and you should be able to press the edges back down to the skin. HAVE FUN AND LIVE LIFE WITHOUT THE WORRIES OF LOSING YOUR PODS! ~~ THE SUGAR PATCH LLC is not affiliated with any medical device manufacturers.

    $2.75


You have seen 48 out of 910 products

Login

Forgot your password?

Don't have an account yet?
Create account